Ken from Whose Life Is It Anyway Persuading the Judge to Let Him Die Essay

In this essay, I will be describing and analysing how Ken, from â€Å"whose life is it anyway†, used persuasive techniques to persuade the judge to let him die. Ken is trying to persuade the judge to let him die, and he persuades him with this quote â€Å"†¦and I find the hospital’s persistent effort to maintain this shadow of life an indignity and its humane. † this quote is clearly showing that he does not want to rely on other people. The word â€Å"maintain† stands for holding something like an object in your household. He does not want the hospital and the doctors to â€Å"maintain† his shadow of life because he thinks that he is â€Å"dead already†. In the quote â€Å"†¦but the dignity starts with their choice. If I chose to live, it would be appalling if society killed me. If I chose to die, its equally appalling if society keeps me alive. † This quote shows that he cares about other people not just himself. The word â€Å"society† is used because it shows that he thinks truly not only about himself. Also there is a word â€Å"choose†, this clearly shows that there is no modal verbs and it is more effective and emotive, as that word, it self, shows that he thought everything though what he actual said. I like the way Ken uses strong words like â€Å"appalling†, by saying this, he is exaggerating and by doing this, he is shocking. Ken doesn’t thing letting someone live although they’re against it is terrible, but the fact that they don’t get the choice. â€Å"The cruelty doesn’t reside on saving someone or allowing them to die. It resides in the fact that the choice is removed from the man concerned† this quote means exactly how ken feels at that moment. The choice is about to be taken from him, and that will make things even harder for him. The word â€Å"cruelty† is a very strong word. Using it, Ken, creates sympathy and it made the whole quote more persuasive and he was saying that people are cruel by taking the choice from him. Also I this quote, he is stating by using words like â€Å"is†, â€Å"fact†, â€Å"it resides†. All of these are modal verbs and show that he knows what he is talking about and is confident with what he thinks and knows. The author chose the techniques for a reason, and the reasons are that the whole fact about persuading the judge needs to be pointed out as it’s the most important bit in the story play, the judge will judge from whether to save the man or let him die as he wanted. It’s a life or death situation. Ken also uses rhetorical questions to make the judge think, â€Å"Is that surprising? † Ken said this on purpose as it is very effective persuasive technique like in the one. Rhetorical questions overall, start arguments and debates in which this story is all about. Overall I think that the judge did the right thing letting ken die. He would be suffering mentally and physically if he didn’t. This story has many different writing techniques and only very few I have analysed in this essay. I think they are very effective upon this story and the story wouldn’t make sense and so much drama if it didn’t.

Do you agree with Juliet Dusinbierres claim that Renaissance Drama is feminist-in-sympathy?

The Renaissance oversaw a debate that challenged the roles of women. Although, feminism did not exist in Renaissance, there were women in society who struggled to achieve equality with men.1 However, whether Renaissance Drama contains feminist sympathies is controversial. John Webster's The Duchess of Malfi 2and Ben Jonson's Volpone3 are two plays that portray a female struggle for freedom and equality. Yet at the same, both plays show that there were limitations to this freedom and equality as not only were women dominated by patriarchy but also it seems that any women who proved resistant to this and strived to achieve equality were eventually punished for their actions. Webster demonstrates how women struggle to achieve equality and freedom as the protagonist, The Duchess is very dominating and independent. Siobhan Keenan supports this as she argues that â€Å"Webster's portrayal of the Duchess does not conform to either stereotype. The woman that we finally meet in the play is witty, self-assured and sexually knowing.†4Keenan makes a strong argument because , seems that the Duchess in the first half of the play at least is domineering and therefore does not remain the ideal, chaste and virtuous woman that formed the typical feminine stereotype in the Renaissance.5 The Duchess is â€Å"self-assured†6 and domineering by the way that she courts Antonio and marries him, despite defying her brothers, Ferdinand and the Cardinal, and marrying beneath her social class. This is seen in Act 1 Scene 3 when the Duchess says: Shall this move me? If all my royal kindred Lay in my way unto my marriage, I'd make them my low footsteps; and even now, Even in this hate, as men in some great battles, By apprehending danger, have achieved Almost impossible actions (I have heard soldiers say so), So i through fights and threatening will assay This dangerous venture. Let old wives report I winked and chose a husband, Cariola, To thy known secrecy I have given up More than my life – my fame (1:3:48-58)7 The Duchess is independent in the way that she marries Antonio, because unlike the male counterpoint that would usually courts his suitor, the duchess decides to appoint a husband for herself, and therefore in the process challenges patriarchal authority. The duchess challenges patriarchal authority because her description of her brothers as â€Å"her low footsteps† (1:3:50)8 illustrates that she cannot be controlled and that nothing will stand in her way of her marriage. Webster also demonstrates how women are equal alongside men to some extent where the Duchess is concerned because it appears that once the Duchess is married to Antonio, she wields immense control and influence over their relationship. This is seen in Act 3, Scene 2 when Antonio suggests: ANTONIO We'll Sleep Together DUCHESS Alas, what pleasure can two lovers find in sleep? CARIOLA My lord, I lie with her often, and i know She'll much disquiet you . ANTONIO See, you are complained of. CARIOLA For she's the sprawling'st bedfellow ANTONIO I shall like her The better for that (3:2:10-14)9 The Duchess's refusal to sleep with Antonio is significant here because it demonstrates not only that she mainly influences her relationship with Antonio but also that she will control her own sexual life and function as a woman. Jonson's Volpone also demonstrates that there is a struggle for women to achieve equality and freedom, as this is partly seen by the characterisation of Lady Politic-Would-Be and Celia. Webster shows how Lady Politic-Would Be is independent by the way that she likes to express her femininity as she says: Come nearer. Is this curl In his right place? Or this? Why is this higher Then all the rest? You ha' not washed your eyes yet? Or do they not stand even i' your head? Where's your fellow? Call her. (3:4:10-14)10 Lady Politic – Would Be's questioning of her beauty is significant here because it demonstrates that not only is she critical of her own image as a woman but also that she wants to control her own femininity and identity. Jonson also demonstrates to a certain extent through his portrayal of Celia that women are resistant towards men. This is particularly seen in Act 3 Scene 7 when Volpone tries to both seduce and rape Celia: VOLPONE Think me cold, Frozen, and impotent, and so report me? That I had Nestors hernia, thou wouldst think. I do degenerate, and abuse my nation. To play with opportunity thus long. I should have done the Act and then have parleyed. Yield, or I'll force thee CELIA O Just God! (3:7:259-264)11 Celia's adornment of Christian values and religion is used to camouflage her resistance to men to a certain extent. Celia's Christian values and beliefs play an important role in allowing her to prove her resistance because it demonstrates that apart from her husband, she is only responsible to God, and therefore this offers protection and comfort to her.12 Furthermore, both Celia's refusal to â€Å"yield† (3:7:263)13 to Volpone and her cry for help could be viewed as a key turning point in the play. This is because not only is this the first time that a female character resists male authority but also it shows that women do have a voice. Celia's voice could mark a stage in the struggle for female equality because it shows that women are both capable of expressing their identity and silencing patriarchy. However, at the same time, Webster and Jonson also show throughout their plays that there are limitations to achieving female equality. Webster and Jonson both show that patriarchy dominates the lives of women and therefore in doing so provides an obstacle to freedom. Jonson and Webster show how women are dominated by patriarchy by the way that both Celia and the Duchess are viewed as possessions and objects of men. Jonson shows that Celia is viewed as an object of Corvino because she is not allowed to leave her home and is therefore kept isolated from society. This is supported by Michael Stout who has argued that â€Å"Celia is not a character to appeal to feminists for she is dependent on the actions of others. Celia is acted upon, rather than acting freely herself and is at the mercy of the male characters in the play.†14 Stout makes a strong argument here because throughout the play, Celia is largely portrayed typically as the chaste, virtuous and subservient woman who proves to be dominated by her husband and is domesticated. Jonson also shows how Celia is treated as an object of her husband by the way that Corvino tries to sell his wife to Volpone, and therefore likens her to money as he asks â€Å"What is my Gold/The worse for, touching?† (3:7:40-41)15 Corvino's reference to Celia as â€Å"gold† (3:7:40)16 is significant here in demonstrating how women are viewed as property because by situating women in economic terms, it allows men to use and abuse women, and hence enables them to become more prosperous and powerful. In similar fashion, Webster also demonstrates that women are referred to in economic terms and treated as objects, as this is seen in Act 1 Scene 3 w hen the Duchess has a conversation with Ferdinand: DUCHESS Diamonds are of most value, They say, that they have passed through most jewellers' hands. FERDINAND Whores by that rule are precious. (1:3:7-9)17 Ferdinand's description of the Duchess as a form of jewellery that is â€Å"precious† (1:3:9)18 is significant in demonstrating how men try to reduce women to objects. This is because by trying to exert influence and dominance over women in this way; it not only allows men to become more prosperous but also more competitive and prestigious in society. Webster also shows how women never really achieve equality as this is seen by the way that the Duchess is murdered towards the end of the play and does not outlive any of the male characters.19 Although, Webster's play is a tragedy, it is significant that he alters the conventions in choosing a woman as his tragic hero. Webster's choice of a woman for his tragic hero and the Duchess' death in the play is important because it could demonstrate that women never really achieve freedom. Women never really achieve freedom because despite striving to achieve a voice, this ultimately proves too artificial and weak within a society governed and driven by men. Renaissance Drama only contains feminist sympathies to some extent. Although Webster and Jonson in their plays show that women struggle to achieve freedom and equality alongside men, this ultimately proves limited and counterproductive as not only are female characters heavily influenced by patriarchy. However, they are also eventually oppressed and punished for any attempted actions or resistance against this.

Jonathan Rhys Meyers

Jonathan Rhys Meyers Jonathan Rhys Meyers was born Jonathan Michael Francis O'Keeffe in Dublin, Ireland, the son of Geraldine Meyers and musician John O'Keeffe. His stage name is derived from his mother's maiden name, Meyers. Rhys Meyers was born with a serious heart problem and was baptized shortly after his birth, as it was feared he would not survive long enough for a traditional baptism ceremony. He spent the first few months of his life in the hospital. Born in Dublin, he moved to Cork City at one year old and was raised there. He has three younger brothers named Jamie, Alan and Paul, who are all professional musicians. When Rhys Meyers was three years old, his parents separated. His mother raised Jonathan and his brother Alan, while his other two brothers went to live at their grandmother's house with their father. Career Rhys Meyers was expelled from the North Monastery Secondary School at age 16, and spent much of his time hanging out in pool halls, namely the Victoria Sporting Club on Patrick's Quay and the Coliseum Leisure Centre on McCurtain Street. Casting agents looking for Irish boys to appear in War of the Buttons spotted Rhys Meyers at a Cork pool hall, the Victoria Sporting Club, and invited him to audition. Although he was passed over for War of the Buttons, the casting agents encouraged him to pursue a career in acting. His first film role came soon afterward, in A Man of No Importance (1994). In 1996, he appeared in Michael Collins, as the title character's assassin. In 1999, he appeared in Ride with the Devil as psychopathic guerrilla fighter Pitt Mackeson. Rhys Meyers has starred in television series including Gormenghast (2000) and in the CBS 4-hour mini-series Elvis (2005) as Elvis Presley alongside Randy Quaid as Colonel Tom Parker and Rose McGowan as Ann-Margret. The latter earned him an Emmy nomination and a Golden Globe win. He is currently starring in the Showtime cable series The Tudors (2007) as the young Henry VIII. He was nominated for the Golden Globe for Best Actor in a Television Drama in 2007 for the role. His film roles range from a David Bowie-inspired glam rock star in Velvet Goldmine (1998) to a dedicated girls' football coach in Bend It Like Beckham (2002). He appeared in Vanity Fair (2004) opposite with Reese Witherspoon. His co-starred opposite with Colin Farrell in Oliver Stone's epic Alexander (2004). In 2005, Rhys Meyers starred in Woody Allen's film Match Point, for which he received a Chopard Trophy at the Cannes Film Festival. In 2006, he appeared in Mission: Impossible III. Other projects include August Rush (2007) and The Children of Huang Shi (2008). He is rumored to be appearing in Danny Glover's Haitian epic Toussaint (2008) and signed on to star as Lee Falk's comic strip hero Mandrake the Magician in an upcoming movie directed by Chuck Russell. Upcoming projects include Shelter, co-starring Julianne Moore, and From Paris With Love, co-starring John Travolta. He also has several films in pre-production, including Mary Mother of Christ and Mandrake, both set for release in 2010. Rhys Meyers, a self-taught singer and guitarist, has appeared in a number of musical roles. His first such role was that of rock star Brian Slade in Velvet Goldmine; two of the songs he sang (â€Å"Baby's On Fire† and â€Å"Tumbling Down†) are on the film's soundtrack. He sang briefly in the TV miniseries version of The Magnificent Ambersons, performed in studio scenes of the miniseries Elvis and played the flute in Gormenghast. In the 2007 music drama August Rush, Rhys Meyers performed on-screen as singer-songwriter Louis Connelly and is credited for four songs on the soundtrack – â€Å"Break†, â€Å"Moondance†, â€Å"Something Inside† and â€Å"This Time†. Of the four, â€Å"This Time† and â€Å"Break† were considered in the Best Original Song category of the 80th Academy Awards. â€Å"This Time† was not released as a single but peaked at #84 of the Canadian Hot 100. Rhys Meyers was chosen as the face for the Versace men's collection of Autumn/Winter 2006 and Spring 2007, and he has also been the face of the Hugo Boss men's fragrance range since 2005. Currently, Rhys Meyers is the face of Hugo Boss' newest fragrence, HUGO Element. He is signed to Independent Models in London. In February 2008, he became a celebrity ambassador for The Hope Foundation. This Cork-based charity aims to provide shelter and supplies to Calcutta's impoverished street children. Rhys Meyers hopes that lending his name to the organization will help raise awareness of the issue. As Ambassador he is expected to visit India and record a TV documentary for the charity. On 5 October 2008, Rhys Meyers received an Honourary Patronage from the Trinity College Philosophical Society in Dublin, Ireland. Interestingly, he has played the father of both Freddie Highmore (in August Rush) and Sarah Bolger (on The Tudors); Bolger and Highmore played siblings in The Spiderwick Chronicles film. [edit] Personal life Rhys Meyers owns houses and apartments in Nichols Canyon, Dublin, London and Morocco, splitting his time between Los Angeles and London when not working. He also owns a horse named Belle and a Chihuahua named Boo Boo. In May 2005, Rhys Meyers checked into rehab facility Promises in California seeking treatment for alcohol abuse. On 24 April 2007, the Associated Press reported that Rhys Meyers returned to treatment. The actor's representative Meredith O'Sullivan confirmed the news to People magazine citing his need to take a break from his busy schedule in order to maintain sobriety. On 18 November 2007, Rhys Meyers was arrested in Dublin Airport and charged with being drunk and in breach of the peace. He was later released on bail to appear at the Dublin District Court on 5 December 2007. He was in Dublin to promote his new movie August Rush on the Irish television programme Tubridy Tonight. The charges were later dropped. On 27 February 2009, the actor checked into rehab a third time, seeking help for his alcohol addiction. Rhys Meyers was believed to be in an English treatment facility this time. He checked out on 15 March 2009. On 20 June 2009, Rhys Meyers was arrested after allegedly attacking a number of staff at a bar in Charles de Gaulle airport, Paris and then threatening to kill them. He was bailed to appear before magistrates on charges of â€Å"willful violence, outrage, hitting and threatening death†, and will appear before the Correctional Tribunal in Bobigny, in September 2009.

Vitamin D in Saudi Arabia Literature review Example | Topics and Well Written Essays - 2750 words

Vitamin D in Saudi Arabia - Literature review Example Vitamin D deficiency affects both phosphorus and calcium digestion. The main role of vitamin D is to regulate calcium levels within acceptable ranges. It achieves this by increasing intestinal calcium absorption. In a vitamin D deficiency state, 10-15 % of dietary calcium is absorbed by the intestine (Brown, Ignatius, Amling, & Barvencik 2013, p.1733-1742). In a vitamin D sufficient state, 30% of dietary calcium is absorbed and during pregnancy, growth or lactation, the absorption can go as high as 80% with increased demand for calcium. In circumstances of vitamin D deficiency, low ionized calcium concentrations espouse the secretion of parathyroid hormone. The parathyroid hormone increases calcium reabsorption in renal tubes and increases 1, 25-1-hydroxylase activity, which results in increased 1, 25- dihydroxy vitamin D (1, 25(OH) 2-D) production (Azhar 2009, p.19-25).   Pregnant women and infants in Saudi Arabia suffer so much of these conditions. Secondly, during old age, men t end to have weaker bones due to reduced calcium and phosphorus concentrations. Increased PTH concentrations result in the loss of phosphorous within the urine. Decreased levels of phosphorus and calcium results in reduced bone mineralization. In addition, reduced phosphorus concentrations lead to failure of the expected apoptosis of hypertrophied chondrocytes.  Ã‚   Calcification delay of osteoid causes osteomalacia in established bones. Osteomalacia in undeveloped bones is known as rickets (Azhar 2009 p.19-25).     Rickets is a description of the abnormal organization growth of the cartilaginous growth plate (Hovsepian 2011, p. 3). The clinical description of vitamin D deficiency that results in rickets is based on bone deformity signs and pain and may be related to hypocalcemia. This condition in Saudi Arabia affects both adults and young people.  

Argumentative Writing about Apocalypse Now and the Vietnam Conflict Essay

Argumentative Writing about Apocalypse Now and the Vietnam Conflict - Essay Example Kurtz is the manifestation of America’s inner collective awareness regarding Vietnam. He defends America’s participation by implying that the Viet Cong are stronger because of their montrosity. The movie portrays Kurtz as a product of the imperfect system, which takes its values to the most extreme conclusion. He was prepared and trained to fill a political position in the future but instead, he turned against the very forces that created him. (French, 1998) Kilgore utters his infamous phrase â€Å"I love the smell of napalm in the morning† at Charlie’s point. His helicopter name was death from above swept in, in sensational formation, accompanied by a musical score of The Ride of the Valkyries, which symbolized the significant passage of dead heroes into Valhalla. This scene lauds war wherein the soldiers become God-like heroes. The Vietnamese remained faceless but the camera isolated the agony of a sole US soldier and this aesthetic show of violence adds to the feel of twisted patriotism. America’s colonial belief were reproduced through the fighting that was occurring in the midst of the California surf. The audience were being encouraged to believe that, contrary to popular belief, the war was not unendurable for the soldiers and so the film made use of chauvinistic approaches to show how the actuality of this situation was compromised. It focuses on the suffering of the US by implying that they were fighting amongst themselves. They either fight or surf. Smoothness in contrast with orientation is a visible theme here. The war itself was compelling and full of meaning, however, a bunch of clowns were running the show. The mission was commendable but the missionaries themselves were not. As Willard was entrusted with the mission to to find and terminate Kurtz, with the full understanding that the man has gone insane, the methods he applied in order to achieve his goals were insufficient. The deeper Willard goes into the Vie tnamese jungle, the more his awareness was rising in regards to his comprehension of how and why Kurtz became what he is. Kurtz lost himself in the very heart of darkness wherein he had no choice but to make his own rules in order to survive. The characters in the story displayed deep respect for Kurtz, which, Willard himself felt compelled to admire himself. By confronting the shift in the shift in his opinion of Kurtz, Willard emphasized how Kurtz can not be judged the way an ordinary man will be judged. Kurtz is a man who was able to transcend to the heights of what other characters in the story are also longing for. Living far away in the jungle, Kurtz was able to escape the bonds which morality and conscientiousness that societies impose. He has turned into a creature filled with the deepest desires and wishes of a every human being, although suppressed. Willard kills him in the end. Kurtz’ last words â€Å"The Horror, the horror† associates to what he must have f elt while he was becoming a part of the wilderness. He acted with what his cardinal impulses were telling him. He killed whomever he wanted to kill and talked to people any way he wanted to and generally treated everyone like he was the one with the power or authority to decide. One view of the story is the message of how the environment can affect one’s mind. Sigmund Freud’s model of the human mind may be used in order to explain how Kurtz’ may have been influenced by the environment. When he left the society as a civilized human being and stepped into a whole new

A cultural experience Essay Example | Topics and Well Written Essays - 1000 words

A cultural experience - Essay Example The Geography of China focuses on not only the position of China but also the enormous human source it has in the world. Located in South East Asia it is the third largest country in the world with 6.5% of land area and second largest in population. China has one more self importance in the world of history that is has the oldest civilization background tracing back to 3500 years. It is a mountainous country. Mountains and hills occupy 65% of the total area of China’s Landscape. China has lot of rivers and lakes Yangtze and The Yellow River are the most famous in the world. Nearly 95%of the population dwells in the North and South regions of China. The highest population count is in fact a strong supporting feature of China. The unity among the people had been a supreme cause in the development of China. Religion too has a great significance in China. Buddhism, though came from India initially, took its massive support only from China. As a result artistic and admirable monuments were built in order to set a strong belief in the Buddhist thought. Religion is cooperated with large family organizations. Either the father or husband takes care of the family. Children live with their parents till they get married. After getting married they will be shifted to a separate apartment. Coming to the food culture of China, they give importance to nutritional values. Colors seem to play an important role in the daily intake of China. Chinese associate colors with the main organs of the human body. Color, flavor, and smell have their equal partake and contribution in their food habits. They combine two to three colored ingredients such as green, light green, dark green, red, yellow, white etc added with sauces and cook. The Chinese had a strong traditional belief that type of food has medicinal values in it. A theory called â€Å"harmonization of foods† by Yi Yin reflects on the link between the five flavors and major organs of human body. They are sweet,

Evaluating the success of the tutoring program Case Study

Evaluating the success of the tutoring program - Case Study Example Unlike other programs that are assessed only on the basis of their outcomes, the success of this program will be assessed right from the way it aims to identify the need to its design and finally to the way its objectives and goals defined. According to Richards and Lassonde (2009) a successful tutoring program can be evaluated right from goal setting to curriculum development. The need The success of tutoring program is one that begins by identifying the need for which the program is being designed. For instance, the targeted person may already have some assessment information like retention rates, test scores, and even anecdotal reports from teachers and family. In such a case, the assessment is likely to entail a clear inventory of up-to-date reading aspects, with a clear indication or identification of their scope and nature, in order to effectively measure the need against existing services, as well as to identify the gaps that the new program is intended to fill. This process h elps at minimizing duplication, mobilize resources, build on experience, and avert the tensions that are likely to arise when the new program is rolled out. Most importantly, this information is aimed at helping the planners to concentrate on the kids whose needs are very high. Research shows that, on average, four out of ten kids are at a high risk particularly in terms of developing their level of literacy (Fashola, 2002). The tutoring program in this case was a success as it captured all the aspects mentioned. For instance, picking a child and administering an informal reading inventory. Analyzing and synthesize the results to know the need of the child. Interviewing the student by asking information about her and her family background such as age and language they speak at home. This initial stage was a big success as it helped the teacher to know the need and also to effectively measure the need against available services. Defines the mission A successful tutoring program must have a well-defined overall mission. According to Morrow and Woo (2001) when developing the mission of the program, planners are supposed to take into consideration significant contributions to supporting the child’s literacy development made by institutions such as child care centers, as well as other out-of-school community programs. Therefore, the mission statement must describe what the tutoring program intends to do in order to effectively address the needs identified. In this case, the tutoring program will be successful if its mission is based around the identified needs. In this case, the assessment will want to establish if the need is well identified: the student is female and bilingual. She does not do much reading at home, she like basketball, like Latin music just to mention but a few. In spite of all these, she wants to learn. When some words list and reading stories, started from 3rd grade word lists to 12th grade to read were administered to test her reading s kills, She did well until 6th grade word lists. The instructor was able to notice that she needed instructions and have comprehension problems. Generally, the need for the tutoring program was about reading. Therefore, the mission would read like: The mission of this Tutoring Program is to encourage the student to develop an attitude for reading, to learn, to help the student become an engaged reader, as well as to ensuring that the student has access to high quality reading materials. If the instructor developed a mission statement like this, he could easily proceed as it sets objectives and goals that the tutoring program is expected to deliver. Therefore, a successful tutoring program is assessed on whether or not it has a well-defined mission statement.

Refute an Argument regarding Immigration Essay Example | Topics and Well Written Essays - 500 words

Refute an Argument regarding Immigration - Essay Example The scales of justice tip away from the illegal immigrant. It tips away from human and civil rights as well. In the United States, overt discriminatory practices during all phases of the criminal justice system concerning ethnic minorities, especially those of African-American or Hispanic descent have been well-documented throughout the history of the country (Sampson & Lauritsen, 1997). In more recent years, various U.S. criminal agencies have increased their efforts to control a new type of minority group, namely illegal immigrants from Mexico and Central America. The U.S. passed the Violent Crime Control and Law Enforcement Act of 1994 which contains provisions that specifically target these groups by deterring employment opportunities for illegal immigrants and has provided a great deal of funding to the Immigration and Naturalization Service so it could increase efforts to diminish illegal immigration by stiffening border control tactics (McDonald, 1997). The recent increased implementation of law enforcement measures which are exclusively aimed at minorities and immigrants has occurred not only in the U.S. but in European nations as well. A study that conducted research in both the U.S. and Europe showed that interactions between police agencies and interactions with immigrants are becoming increasingly tense as evidenced by a proliferation of physical and verbal abuse, a growing mutual distrust and an escalating threat of violence. In the U.S., â€Å"Discrimination against minorities occurs indirectly as a result of poor legal representation, language problems, high incidences of specific offenses (such as drug-related and immigration violations) and low level of employment status† (Marshall, 1997) As compared to constituents of the socially dominant faction, illegal immigrants are much more liable to be detained, questioned, and searched by law enforcement officials. Once they have been arrested, minority members are also more

Applying Theory to Practice Term Paper Example | Topics and Well Written Essays - 500 words

Applying Theory to Practice - Term Paper Example origin of the juvenile delinquent behavior may be understood by looking at the backgrounds of young people who for various reasons have led a life full of misery. For instance, youths who are at risk of becoming delinquent may have originated from families with parental alcoholism, overcrowded neighborhood, family breakdowns, the increasing HIV/AIDS scourge, abusive circumstances in the home, or the death of parents due to armed conflicts. It may be noted that young people from such backgrounds may be either unaccompanied or orphaned and lack the means of subsistence, shelter, and other basic needs, increasing their chances for falling into juvenile delinquency. Many developing nations do nothing or very little to look into the needs of the young citizens or ignore some petty crimes reported concerning these youths. Some of these youngsters commit crimes at a tender age and they are either ignored by the authorities or go unreported, yet the petty crimes lead to more serious crimes in future. Developed countries on he other hand are engaged in activities designed to prevent juvenile delinquencies but the overall effect of such programs is weak because the techniques in place are usually inadequate to address the situations that already exist (Siegel & Welsh, 2011). According to geographical analysis, nations with more urbanized populations register more juvenile delinquency rates than those with strong rural communities and neighborhoods. This may be linked to the dissimilarities in social cohesion and control. Rural groupings depend on community and family control to deal with antisocial behavior, thus lower crime. Urban lifestyles resort to judicial and formal measures, an impersonal mechanism that links to higher juvenile delinquencies. i. Youth crime results from unresolved internal conflict and mental anguish. Some youths who have been mistreated or abused may go through unconscious feelings linked to fear, resentment, and abhorrence. If this conflict s

The Political Economy of the European Union Essay

The Political Economy of the European Union - Essay Example Japan in particular has created worrisome situation for European economy and trade, this Asian country "has influenced in monetary and technology domains" (Wayne, 1992). It is essential for the European government and market to realise that it has to re-structure its political and economic policies, the union has to "construct a coherent political presence on the global stage in order to achieve the most attractive accommodation to the new order" (Wayne, 1992). The union shall realise that American economy has been partially able to sustain the implications caused by Chinese and Japanese market, however the political influence of the country supported by its stakes in policy making institutions kept the vital interests of the country protected and intact. The European Union has to take serious efforts to improve its political authority, and has to take political influence driven trajectory to reach a point of influence and dominance, to reign supreme in this world of competition and challenges (Ben, 2000). The major decisions in the history of the union have been influenced by liberal inter-governmentalist, who developed two-stage approach. The initial approach focused upon determination of primary preferences based upon "constraints and opportunities imposed by economic interdependence" (Andrew, 1993). The last approach is based upon the results achieved through intergovernmental negotiations, such achievements "were determined by the relative bargaining power of governments and the function incentives for institutionalization created by high transaction costs and the desire to control domestic agendas" (Andrew, 1993). The agricultural policy of the union is based upon the collective financial interests of the producers, the trade policy is also determined based upon such interests. The sets of such desires and preferences describe the societal limits on the governments, the limits of compromise is also determined through such act. The union has adopted the economic policies similar to the policies practiced by other international groups; the union has decided to improve the efficiency of bargaining through implementation of cost reducing rules. The only difference between the union and remaining international associations is that the union has "delegate and pool sovereignty" (Andrew, 1993), such that the crucial decisions "about linkage out of the hands of national governments" (Andrew, 1993) are taken swiftly. The union has decided to focus upon potential benefits from co-operation, and ignore the domestic political risk. The union has developed "two-level game", such structure is responsible for the rise in the "initiatives and influence of national government by providing legitimacy and domestic agenda-setting power for the initiatives" (Andrew, 1993). The notion of liberal inter-governmentalism has transformed the union into model of politics, which leads to the specification with reference to process integration (Desmod, 2006). The European Union works on joint-decision mode, all the major economic decisions undertaken by the union needs necessary consent of major parties, if not all. The mode of operation, where decisions are taken after joint approval which is integration of intergovernmental

Children Youth and Environments Journal Essay Example for Free

Children Youth and Environments Journal Essay The Role of the Youth in Establishing Unity in a Diversified Multicultural Society Years passed, adults have tried to control youth because they represent the future. Young people often fight back, trying to create their own world that is separate from their parents. At the end of World War II they were finally given a name: â€Å"teen-agers,† an ideal of young people as consumers. That model for youth spread around the world, and still exists today. Throughout history, young people have played an active role in shaping major social and political advancements. Today’s growing globalization and cross-border movements create an environment, which is increasingly diverse in terms of culture and religion. Young people’s contribution to understanding the impact of this diversity on everyday life as well as politics is now more crucial than ever. Moreover, as they constitute the largest segment of population in many regions, the role of youth in shaping their country’s response to cultural and religious diversity is vital. We clearly see youth as an essential asset – a crucial pool of talent, ideas and energy – that plays a critical role in addressing the challenges related to global and local instability. We must get control of this. We must motivate our youth. We must teach responsibility and goal setting. I fear if we do not we will soon be supporting an entire generation of homeless and needlessly on welfare families. Things have to change, with our schools, with the older generation being good role models, with the older generation being mentors, and with the youth who are right now doing nothing. We believe that it is important to recognize young people’s own contribution to promoting respect and understanding and fostering dialogue among people of different backgrounds. With teenage unemployment soaring, young people can no longer influence the world with their wallets. As student protests began exploding across the globe this fall, we felt compelled to [continues]

Herbert Spencer Essay Example for Free

Herbert Spencer Essay He was a biologist first before he became a philosopher. Spencer was born on 1820 of April 27. He never had a formal education, instead he was being taught home by his parents. He was taught of math, social sciences and science and he was also taught of a variety of speaking languages which made him very intelligent and proficient. He was a typical, ordinary boy who loves to play around but unfortunately he easily gets sick and even he was an adult he easily catches illnesses. He had an insomnia which greatly affected him physically. He had his job when he was still on his teenage years in the railways and loved to write things. This contributed to what he has become and what great things he has achieved in his life. Herbert Spencer was born 1820- 2903, a British philosopher. He is noted for his effort to devise a philosophical system incorporating all scientific learning. In this â€Å" synthetic philosophy,† as he called it, Spencer applied to all branches of knowledge the principle of evolution, which he defined as the change of all things from simple to more complex forms. Spencer achieved particular renown as a social evolutionist. His conclusion that society evolves by the biological process of natural selection, a process for which he coined the phrase â€Å"survival of the fittest†, was highly influential. Some of his ideas, however, were based on the largely discredited notion that acquired characteristics can play a role in evolution. Spencer’s first book, Social Statistics in 1850 , presented a theory of evolution predating Charles Darwin’s Origin of Species by nine years; unlike Darwin, however, Spencer, did not present scientific evidence to support his theory. After Darwin’s theory of natural selection was published, Spencer adopted it enthusiastically. He then wrote a series of volumes surveying biology, sociology, ethics, and psychology from an evolutionary point of view. These works brought him world recognition. The first book in the series, First Principles in 1862, presented his synthetic philosophy. It caused much controversy on the relation between science and religion. Spencer, an agnostic, rejected all theological systems as futile attempts to know the unknowable and concluded that knowledge can be gained only through the study of science. Spencer was taught by his father who was a schoolmaster and uncle who was a minister, and did not attend college. Although his real interest was science, for several years he worked as a civil engineer for an English railway and later as an editor for the Economist in 1848- 1853. He is an English Philosopher; he generalized evolutionary theory outside the confines of biology. He wrote the principle of Psychology in 1870-1872 and Sociology in 1873- 1896, he applied his encyclopedic knowledge to support his historicist concept of progress. The common origin of European Sociology was the Enlightenment. Different national traditions reacted to the enlightenment inheritance in different ways. The only British innovations were Spencer’s adaptation of Darwin’s model of Biological evaluation to provide explanations of societal change. In France, however, the conservative reaction to the French Revolution rejected atomistic models of society which is centered on the individual and questioned the validity of empirical inquiry. The man who added something new to this idea was only Herbert Spencer. He recognized that the Orthodox interpretation of society assumed but did not explain change. Spencer, however, did not abandon the ideas of the Enlightenment but regarded them in relation to a model of social change owing much to Darwin’s origin of species. He argued that societies were driven forward to more complex and higher forms by the struggle for the survival between individuals, and that the struggle had produced in Britain a Laissez Faire industrial society, which was a yet the highest social form. He was said to be the competitor of Charles Darwin. Survival of the Fittest and Evolution are the common terms being made known by this Victorian Biologist  who eventually became a philosopher. He viewed evolution as the same that he thought was not consistent. He had formulated different concepts and these are the Adaptation, Integration, Growth and Differentiation. Spencer’s remaining years were still focused on his thought of evolution of mankind and its outcome in the future. He was full of pessimism and thought that maybe mankind will not be able to survive. Herbert Spencer was idolize by many and many were influenced by him and they were Charles Darwin, Alfred Marshall, Henry Sidgwick, William Graham Sumner and many other sociologist and theorists. He became known duet to his Positivism and Evolutionism. He developed ideas which helped made other ideas which explained more of the existence of man. His greatest contribution to mankind was to think and explore more from their minds and not just settle in mediocrity. He wants us to be concerned of the society in which we are existing and the culture that we are following and passing on to other generations. In 1903, Herbert Spencer died. He died with dignity and great reputation, bringing with him the appreciation and love by the entire individual’s around him that time.

Process Intensification In Chemical Engineering Engineering Essay

Process Intensification In Chemical Engineering Engineering Essay Process Intensification (PI) is a concept in chemical engineering which first defined back in 1970 sparked by the need to reduce capital cost involved in a particular production system This was first pioneered by ICI to reduce plant volume without sacrificing its production capacity [1, Dautzenberg] (Dautzenberg, et al., 2001). There was a first international conference in 1995, International Conference for Process Intensification in the Chemical Industry. Ramshaw was the early scholar who worked on process intensification philosophical foundation, defined PI as a strategy for making dramatic reductions in the size of a chemical plant to achieve a given production objective (Ramshaw, 1995). Process intensification involves dramatic reduction in chemical plant equipments by installation or individual equipment volume as presented by (Ramshaw, 1995) and (Stankiewicz, 2003). By mentioning dramatic reductions, Ramshaw mentions of miniaturizing volume by the order of 100 to 1000. This definition by Ramshaw is quite limited and is cited in Stankiewicz (Stankiewicz, et al., 2000) as being too narrow that it discussed more on size reduction. PI can be defined as intensification on particular desired effect and size reduction is one of many desired results that can be achieved through PI. This definition is widened by Stankiewicz definition of process intensification as any chemical engineering development that leads to a substantially smaller, cleaner and more energy-efficient technology is process intensification (Stankiewicz, et al., 2000). BHR Group defines process intensification as: Process intensification is a revolutionary approach to process and plant design, development and implementation. Providing a chemical process with the precise environment it needs to flourish results in better products, and processes which are safer, cleaner, smaller, and cheaper. PI does not just replace old, inefficient plant with new, intensified equipment. It can challenge business models, opening up opportunities for new patentable products and process chemistry and change to just-in-time or distributed manufacture (BHR Group, 2003). This has been widely accepted (try to connect references) as definition of process intensification in chemical industry. Process intensification can be categorised into two types of approaches which are; (1) methodology-based approach and another one is (2) equipment-based approach. Figure Process intensfication and its components (from Stankiewicz et al. 2004). This major categorisation of two approach in process intensification is also presented and some of the latest existing industrial examples are given in an article in The Chemical Engineer journal (King, et al., 2010). Reaction Engineering involves Sizing and bla bla bla Reaction engineers spend a lot of efforts and ingenuity in enhancing reactors performance by studying and implementing any optimum trajectory for the reaction system to be operated (Nicol, et al., 2001). bla bla bla In reaction engineering, equipment-driven approach is about reactor improvement of rate of reaction by specific-volume, heat transfer and mass transfer, hence may push chemical process or catalyst performance to achieve the best out of their potentials. Nowadays this is done in terms of enhancing conversion rates and reducing by-products formation by achieving concentration and temperature profiles [4, Multfunct.React. Agar pp. 379-381] (Agar, 2004). Catalysis is one of examples of process intensification approach by methodology in general sense, as it serves a function to reduce activation energy required for a reaction to occur. In chemical industry there are two major types of catalytic reactor configurations, being the structured and random reactors. These categories are reviewed later in the next section regarding their benefits in reaction engineering process intensification. Some applications in chemical industry by process-intensifying equipment approach are integrating several unit operations or equipments into one multifunctional reactor, designing a new hybrid separation such as reactive distillation and reactive absorption [2, Trans] (Stankiewicz, et al., 2000). Integration in between two equipments as examples has been reviewed by Stankiewicz (2003) [5] Stamicarbons Urea 200plus technology. In this paper, the reactor is designed incorporated with condenser and known as pool reactor. Size comparison shown that in this particular case size of equipment reduced to one-fourth of the conventional equipments (Stankiewicz, 2003) [5]. The best reactor design and configuration is identified in a particular chemical process by knowledge available in its reaction chemistry, contacting pattern in terms of how and when individual elements pass through the reactor and contact one another and how long its identity changes. Furthermore, critical studies in reaction overall kinetics as well as its thermodynamics to which elements are exposed along their reaction trajectory is important in enhancing chemical reactor or in order to integrate reactor with any other unit operations. Through this reactor design concept, the most suitable reactor configuration is selected, e.g., ideal plug flow, packed-bed and etc. Overall kinetics bla.. bla.. bla.. In considering thermodynamics, heat transfer within or across the boundaries of reactor is a crucial consideration to establish optimised reaction in multifunctional reactor, based on their activation energy needed for raw materials to react. In multifunctional reactor this is the scope where energy would be supplied or removed from an endothermic or exothermic main reaction to maintain a forward drive of chemical reaction. Energy balances are important at this stage and establishing temperature profile is needed from analysis for purpose of chemical reaction intensification. Methods of heat transfer are also reviewed as there are categories of heat transfer methods known to be efficient in a particular reaction. This is the normal and widely accepted procedure Individual reactor design such as static mixer reactor, monolithic reactor, spinning disk reactor and etc, are examples of equipment-driven approach in process intensification (Stankiewicz, 2003). This examples are actually concepts revolves on developing component design and improvement of a particular reactor. Development of Modelling of process intensification. MAIN PARTS a PI Area of Concern in Reaction Engineering Applications. Heat exchange in reaction engineering Reactor usually contains high amount of energy namely heat as reaction is progressing with reactor usually being operated at the highest temperature compare to other equipment upstream and downstream. This is essential to the reactions as thermal energy required for molecular bond to form or dissociate. Heat exchange in reaction engineering design has been studied extensively as heat transfer plays a significant role in all chemical reactions. Agar D.W. (2004) (Agar, 2004) has categorised heat transfer into four categories, namely convection, recuperation regeneration and reaction (Figure ). This categorisation helps a lot in providing the best heat transfer solution in knowing which the best reactor configuration is in adding or removing heat. Figure Heat transfers for manipulating temperatures and concentration profiles in chemical reactors (from Agar, 2004). Convection is additional or removal of side-streams which intentionally limits the availability of one reactant, hence, improving selectivity, e.g.; cold-shot reactor. In recuperation heat transfer there is an external heat transfer sources and sinks which operates to generate temperature differences in between reaction phase and heating medium by taking in or removing heat somewhere else, e.g.; cooling towers, fin fan coolers, heat exchangers and etc. Regeneration heat transfer makes use of the reactor internals, usually beds or packings as an accumulation of heat and mass in order to establish temperature profile and also concentrations. This temperature could not increase when in steady-state operation (Agar, 2004). Reaction is a straight-forward combination of main reaction with compatible supplementary reaction either thermally or materially, e.g.; oxyhydrogenation (Agar, 2004). Operating temperature is achieved in reactor by one of these heat exchange approaches using various kinds of reactors accessories in multifunctional reactor such as heat jacket, tubes heat tracing or less commonly by heating coil. Mass transfer in reaction engineering Integration of mass transfer and catalyst has been studied (since, whom, what are achievement so far.) and prominently applied in reactive distillations which will be reviewed in details below. Packing shapes Multifunctional reactors development. e.g; Pool reactor, reactive distillation column, heat exchanger reactor Multifunctional reactors are reactors that serve many functions of unit operations in single equipment. These reactors usually combined with separators either distillation or absorber, or with heat transfer equipments such as cooler, heater or condenser. Some of the examples are: Pool reactors (reactor-condenser) Reactive distillation columns Pool reactor were discussed in Stankiewicz 2003 [5] (Stankiewicz, 2003), where combination of reactor and condenser yielded a novel equipment. Worlds first pool reactor is known developed by DSM Research back in 1945. A type of multifunctional reactor in which combined reactor and condenser was studied in details by Ben Amor et al (1999) (Ben Amor, et al., 1999) took methanol synthesis from its raw material, syngas in prototypes as main scope. (Add a bit of elaboration for advancement achievement). This is further developed and analysed in Haut, et al (2004) (Haut, et al., 2004) Heat exchanger reactor is designed by combining reactor, heat exchanger and scrubber by the PI in multifunctional reactor design. Multifunctional reactor has been a good example of process intensification by equipment-driven approach. Process intensification in multifunctional reactors were presented in Pros: Examples in practiced Cons: There Several functions or processes are designed to occur simultaneously in multifunctional reactors. One of many examples of these reactors is fluidised catalytic cracker (FCC) that has two reactions occur in one unit operation namely cracking and another is removal of coke in hydrocarbon (Dautzenberg, et al., 2001). Issues Implementation MAIN PARTS b Chemical reactors often used catalysts in its operations as they provide easier path for reaction to happen that the activation energy is lowered with their presence in reaction phase. Two general categories of catalytic reactor configuration are random catalytic reactor and structured catalytic reactor. Structured catalysts has been paid attention Random catalysts Reactive distillation is one of many examples of process intensification in multifunctional reactor. One of many good examples in process intensification by integration of unit operations is the reactive distillation in which reaction phase is put together with separation phase in single equipment. This has been call as pool reactor (Stankiewicz, 2003 [5]) (Stankiewicz, 2003). Reactive distillations uses column packing which made by the catalyst material as the reactants pass through the column will react and the separation takes place along the column throughout the packing This was initiated by the studies.. where column internals which use conventional packing shape with materials that could probably be replaced with catalytically compatible materials to bring forward reaction equilibrium for more yields. An example of this ground-breaking new packing is Super X-pack (structured packing) designed and manufactiured by Nagaoka International Corp., able to reduce size of column down to five times smaller compares to conventional column and much lower pressure drop across the packing. This dramatic reduction of equipment size was illustrated as comparison to conventional applications by Stankiewicz (2003) [5] (Stankiewicz, 2003) as shown in figure (Figure ). Figure Super X-pack revolutionary packing for distillation columns by Nagaoka International Corp. Sulzer Chemtech developed KATAPAK-S packing as catalytic packing and this is packing has been studied in details regarding the geometry of flow channel, hydrodynamics and mass transfer performance in Behrens et. al. (2006) [9] (Behrens, et al., 2006). Modelling of liquid hold-up, pressure drop and mass transfer were conducted specifically based on this Sulzers KATAPAK-S as the main focus in this publication. This knowledge is crucial for further developments and applications. Stankiewicz (2003) (Stankiewicz, 2003) is also cited in this paper in terms of combining reactors and separators. Future researches on these Super X-pack and Sulzers KATAPAK-S are potential development of catalytic version of this packing. From process-intensification point of view this could possibly be the breakthrough shift in vast reduction of column size and a key step up in reactive distillation that will bring a extensive benefits in chemical industry. Parkinson (2000), Drip drop in column internals Applications in Chemical Industry. Catalytic reactive distillation has been commercially used in chemical industry (DeGarmo J.L., 1992) [8] (DeGarmo, et al., 1992). One of the examples of applications in chemical industries is the Methyl Acetate separative reactor technology development by Eastman Chemicals. This is presented by Siirola (1995) [12] (Siirola, J. J.; Eastman Chemical Company, 1996). This has been cited in Stankiewicz (2003) [5] to reflect the extensive reduction in plant size. This massive plant size of seven tasks is integrated into single piece of equipment. Distillation, extractive distillation, reaction, reactive distillation are the discrete tasks which have been combined into one column. As the result, numbers of equipment are reduced to 3 from conventional plant that has 28 equipments. This is shown in figure (label figure below) Figure 4 Plant integration in methyl acetate separative reactor process by Eastman Chemical (from Siirola 1996 [13]). Benefits (to relate this point of integration benefits in between [5, Stankiewicz], [Ramshaw,1999] cost reduction and [6, Hendershot] safety regarding integrated unit operation e.g.; pool reactor, in reactive distillation) Cost reduction on the major plant item was the primary objective of PI, but other benefits comes along with this reduction of costs such as structural work, earth/civil work for large vessel foundations, installations and labour as well as less pipe work needed (Ramshaw, 1999). While looking into process intensification from safety point of view this equipment integration .. (Hendershot, 2004) This can reduce the risk of reaction stage while in operation as reducing the size of the plant means minimising hazardous material usage concept proposed by Kletz (Kletz, 1996). The possible opportunity for chemical fugitive through pipe connection in between unit operations is also eliminated as what you dont have cant leak (Kletz, 1978). This simpler plant is the result one looking for in achieving the objective in process intensification. Smaller plant is one of the objectives in process intensification and parallel with the concept of mentioned above in introduction (Stankiewicz, et al., 2000). Potentials of further development of reactive distillation: Pool reactor was started as RD program by DSM Research back in 1945 and after 51 years, the technology was established and patented in 1996 in urea production known as Urea 2000plusà ¢Ã¢â‚¬Å¾Ã‚ ¢ technology. The first commercial plant was commissioned in 1998 when start-up of first Urea 2000plusà ¢Ã¢â‚¬Å¾Ã‚ ¢ pool reactor plant. Stamicarbons Urea 2000plusà ¢Ã¢â‚¬Å¾Ã‚ ¢ technology reduced the size of installed equipments from early establishment at total height of 78 metres .. (Bakker, 2004). Reactor Stripper Condenser Scrubber Pool Condenser Pool Reactor Urea 2000plusà ¢Ã¢â‚¬Å¾Ã‚ ¢ technology Conventional urea technology C:UsersdynaPicturesMP Navigator EX2010_10_03Urea 2000Plus Pool Reactor2.jpg Figure 5 Reduction of size by integration of reactor, condenser and scrubber featured in Stamicarbons Urea 2000plusà ¢Ã¢â‚¬Å¾Ã‚ ¢ technology (from Bakker, 2004). MAIN PARTS c Modelling of process intensification. Modelling Modelling of Krishna Taylor (2000) MAIN PARTS d Process intensification for safety. In establishing a chemical plant nowadays, there are massive lists of safety legislations need to be adhered. One of the best practices in chemical industry is to construct a plant with elements of inherent safety. Inherent safety and intrinsic safety mean the same and would be used interchangeably from this point onwards. Process intensification is an important aspect that needs to be implemented in achieving an inherently safer chemical process and plant. Process intensification for inherent safety concept has long been establish has been Intrinsic safety in reactor configuration and operation is a crucial element since reactor is a heart of a chemical manufacturing plant. Being the centre of a process containing various components of chemicals as raw materials are introduced and as reactions took place there would be mixture of products and normally more than two by-products. Reactor also traditionally contains high amount of energy namely heat as operating with usually being operated at the highest temperature compare to other equipment upstream and downstream. This is where energy would be supplied or removed as stated before in the introduction. From the point of equipment integration reviewed before, reactor combination with other unit operations such as distillation, condenser, scrubber or heat exchanger is another approach in process intensification, i.e; equipment-driven approach (King et. al. 2010) [10]. MAIN PARTS e Barriers and potential prospects of process intensification in reaction engineering. Besides wide-ranging advancement in PI in reaction engineering, there are several difficulties known in holding back the research and implementation of technologies. This occurs especially in upscaling from lab or pilot scale to commercial scale. In 1998 AIChEs Center for Waste Reduction Technologies organised two workshops that has recognised barriers for reactive/hybrid separations and as agreed there were three categories of technical and nontechnical difficulties which are: Technical gaps, such as lack of simulation and scale-up capability, lack of validated thermodynamics and kinetic data, lack of materials (compatible materials, e.g., integrated catalysts/sorbents, membrane materials) as these materials have to be developed specifically for the purpose of new process chemistry, and lack of high-level process synthesis methodology. Technology transfer barriers, lack of experts in multidisciplinary team in process integration approach, lack of communality of problems (each application has unique technology) and lack of models/prototypes on a reasonable scale (most of the studies still regarded as science which involves small-scale researches). General barriers, such as higher standards, to require implementation of new technologies, as opposed to conventional technologies, lack of process economics (as new technologies have not been proved to be feasible as there is no commercial model available) and fear of risk in operating new technologies. Besides those difficulties, future opportunities CONCLUSIONS The implementations of process intensifications transform conventional chemical engineering unit operations into a revolutionary process technology whether by integration of several unit operations or by altering intrinsic chemical process elements to eliminate unnecessary process bottlenecks. Changes usually measured by the substantially cost improvement, progress delivery/process time, [3, Re-Engineering chem]

RUSSIA CULTURE :: essays research papers

Russian Culture   Ã‚  Ã‚  Ã‚  Ã‚  Russia culture is very different from any other culture that I have ever read about. This is a country that is dominated by males. Males actually run the county of Russia. The men are so dominated that every Russian women dream is to be married and have a family with these men. Russia is known for its poor society. In the book Sakharov he mentions how he moved from one place to another. He first was in Moscow’s larger apartments with his family. In this apartment there were six families. With thin the six families they had to share the kitchen and the bathroom. Then he states that he moved into a very old house and in this old house there was a leaking ceiling. With in this house there were still six families that shared everything. (Sakharov 24-25)   Ã‚  Ã‚  Ã‚  Ã‚  In Russia there is a very high divorce rate. The divorce rate is high because of the prostitution and getting married just for religious purposes. My couples get married in Russia at a young age. Getting married at a young age is not a good idea in Russia or nowhere. Because of the prostitution rate in Russia it is bringing the abortion rate also. Just about every woman in Russia has had at least five abortions. The reason why woman get abortions is because they were either messing around with some one else man or they are married and got pregnant and neither of the spouses want the child.   Ã‚  Ã‚  Ã‚  Ã‚  Russia has a high crime rate also. Their crime rate is so high that if you were to go to the store like the grocery store, when you walk in the store u have to lock your things up in a locker and shop. When you got through shopping then you were to pick up your stuff out of your locker. The whole time that you are shopping there are people watching your every move. The reason why the crime rate is so high is because they work hard to get paid a little amount of money. Russia’s unemployment rate is very high. There are not enough jobs in Russia for everyone to have a job. For example if you were to get a job at a fast food restaurant, you were only getting paid a little or nothing an hour and that’s not even close to minuan wage in America.

The Master vs. The Student: Antonioni and Coppola Essay -- Michelangel

The Master vs. The Student: Antonioni and Coppola Michelangelo Antonioni initiated a shift in Italian film in the 1950s. He kept some aspects of Italian Neorealism but then moved away into the world of the art film. With Blow-up, which was made possible by a deal MGM for a series of films in English, he takes a meandering, odd storyline and places it in trendy, ?swinging? London (Thompson & Bordwell, 426-7). He further reinforces the distance between the diegetic world of the film and the audience through precisely spacious camera techniques. ?I want to re-create reality in an abstract form. I?m really questioning the nature of reality,? Antonioni has said honestly about the film (Arrowsmith, 112). He has taken the audience-active film to a new and interesting level. Blow-up has often times been compared to Francis Ford Coppola?s The Conversation. The two films not only share a similar plot (two men, both leaders in their fields, inadvertently stumble across a murder or murder plot and must reevaluate themselves while reevaluating their creations) but Coppola uses much of the same camera techniques as Antonioni, as well. The film is not a total emulation, though; Coppola adds his own twist by taking space and contorting it, whereas Antonioni might leave it in the abstract. In examining the two aspects of space and self-evaluation, one can see that Coppola?s The Conversation does not imitate Antonioni?s Blow-up as much as it learns from it. Antonioni?s most noticeable and intriguing tool of Blow-up is the use of space within each frame. Antonioni, on the cusp of Neorealism, often times places the camera far from Thomas (the main character played by David Hemmings), letting him move about freely within the frame. ... ...as far back in the room the camera could get, it seems). All of these shots reinforce the loneliness, desperation, and isolation of these two stranded souls. All these shots lend to the two breaking down barriers within themselves to reach a better, actualized self. And, all of these shots could easily have been produced by Antonioni or Francis Coppola; perhaps there is hope for a new wave of the Antonioni-art-film style. Works Cited Arrowsmith, William. (1995). Antonioni, The Poet of Images. New York: Oxford. Brunette, Peter. (1998). The Films of Michelangelo Antonioni. Cambridge, United Kingdom: Cambridge University. Leprohon, Pierre. (1963). Michelangelo Antonioni: an Introduction. New York: Simon and Schuster. Thompson, Kristen & Bordwell, David. (2003). Film History, an Introduction. Boston: McGraw Hill. The Master vs. The Student: Antonioni and Coppola Essay -- Michelangel The Master vs. The Student: Antonioni and Coppola Michelangelo Antonioni initiated a shift in Italian film in the 1950s. He kept some aspects of Italian Neorealism but then moved away into the world of the art film. With Blow-up, which was made possible by a deal MGM for a series of films in English, he takes a meandering, odd storyline and places it in trendy, ?swinging? London (Thompson & Bordwell, 426-7). He further reinforces the distance between the diegetic world of the film and the audience through precisely spacious camera techniques. ?I want to re-create reality in an abstract form. I?m really questioning the nature of reality,? Antonioni has said honestly about the film (Arrowsmith, 112). He has taken the audience-active film to a new and interesting level. Blow-up has often times been compared to Francis Ford Coppola?s The Conversation. The two films not only share a similar plot (two men, both leaders in their fields, inadvertently stumble across a murder or murder plot and must reevaluate themselves while reevaluating their creations) but Coppola uses much of the same camera techniques as Antonioni, as well. The film is not a total emulation, though; Coppola adds his own twist by taking space and contorting it, whereas Antonioni might leave it in the abstract. In examining the two aspects of space and self-evaluation, one can see that Coppola?s The Conversation does not imitate Antonioni?s Blow-up as much as it learns from it. Antonioni?s most noticeable and intriguing tool of Blow-up is the use of space within each frame. Antonioni, on the cusp of Neorealism, often times places the camera far from Thomas (the main character played by David Hemmings), letting him move about freely within the frame. ... ...as far back in the room the camera could get, it seems). All of these shots reinforce the loneliness, desperation, and isolation of these two stranded souls. All these shots lend to the two breaking down barriers within themselves to reach a better, actualized self. And, all of these shots could easily have been produced by Antonioni or Francis Coppola; perhaps there is hope for a new wave of the Antonioni-art-film style. Works Cited Arrowsmith, William. (1995). Antonioni, The Poet of Images. New York: Oxford. Brunette, Peter. (1998). The Films of Michelangelo Antonioni. Cambridge, United Kingdom: Cambridge University. Leprohon, Pierre. (1963). Michelangelo Antonioni: an Introduction. New York: Simon and Schuster. Thompson, Kristen & Bordwell, David. (2003). Film History, an Introduction. Boston: McGraw Hill.

Apple and the Personal Computer Revolution :: Technology Computers Steve Jobs

Apple and the Personal Computer Revolution Let’s take a trip back in time and review the evolution of a computer company. It’s not IBM or Microsoft. This company is Apple Computers, Incorporated. In the year 1976, before most people even thought about buying a computer for their homes. Back then the computer community was only a few nerds building simple computers from hobby kits. When Steve Wozniak and Steve Jobs sold a van and two programmable calculators for thirteen hundred dollars and started Apple Computers, Inc., in Jobs garage, the reach for success seemed far. But these two young business men, Wozniak 26 years old and Jobs 21 years old, had a vision. â€Å"Computers aren’t for nerds anymore,† they announced. â€Å"Computers are going to be the bicycle of the mind. Low cost computers for everyone.† From the first day on the founders of Apple kept their vision intact, and they spoke it at every turn. They only hired people into the company that had the same visions as they did. In early 1976 Wozniak and Jobs finish work on a preassembled computer circuit board. It has no Product keyboard, case, sound or graphics. They call it the Apple I. They form the Apple Computer Company on April Fool's Day and sold the Apple I board for $666.66 at the Home brew Computer Club in Palo Alto, California. In 1977 the Apple II is available to the general public. Fully assembled and pretested, it includes 4K of standard memory, and comes equipped with two game paddles and a demo cassette. The price is $1,298. Customers use their own TV set as a monitor and store programs on audio cassette recorders. Compare this price with computers today. The price about the same, but the computer has changed tremendously. In 1979 Apple II+ is introduced, available with 48K of memory and a new auto-start ROM for easier startup and screen editing for $1,195. Apple II Pascal is also released. In 1980 Apple FORTRAN introduced and proves to be a catalyst for high-level technical and educational applications. Apple III announced at the National Computer Conference. It has a new operating system, a built-in disk controller and four peripheral slots priced at $3,495, the Apple III is the most advanced system in the company's history. Product In 1981 Accessory Products Division formed to handle production of printers, modems and other peripherals. The Apple Language Card is introduced.

Plant layout Essay

PLANT LAYOUT Outline of Contents: What is Plant layout? Necessity of good layout Factors affecting good layout Principles of good layout Advantages of good layout Symptoms of poor layout Types of layout What is PLANT LAYOUT? Plant layout refers to the arrangement of physical facilities such as machines, equipment, tools, furniture etc. in such a manner so as to have quickest flow of material at the lowest cost and with the least amount of handling in processing the product from the receipt of raw material to the delivery of the final product. Plant Layout is a plan of an optimum arrangement of facilities including personnel, operating equipment, storage space, material handling equipments and all other supporting services along with the design of best structure to contain all these facilities. A good layout is one which allows material rapidly and directly for processing. This reduces transport handling, clerical and other costs down per unit. Space requirement are minimized and it reduces idle machine time and idle time of man. Necessity of good plant layout Minimization of material handling Optimum utilization of available floor space Elimination of bottlenecks through balancing of all capacities Minimization o production delays Easy supervision and better manpower resources through elimination of idle time Elimination of physical efforts required by workers Elimination or improvement of objectionable operations. E.g. Operations with bad odor, vibrating operations etc. Avoiding industrial accidents Better working conditions like light, ventilation, noise control etc. Optimum utilization of machinery and equipment through proper use. Minimization of cost so that product will be available at cheaper rate to customer and  delivery in time. Factors affecting facility Layout Nature of plant-Engineering/Process Industry Type of Production-Mass/Flow, Batch, Job Shop Type of Production-Make to Stock/order, std/spec Plant Location-Area available, building type-storey Volume of Production-Scale of production Types of machines and equipment-automation Repairs and maintenance -Policy, schedule on site Arrangement of material handling equipment Future expansion plan Principles of good Layout Minimum Handling Interdependence Minimum investment Integration of factors-3M Minimum movement-Distance/Flow Continuous flow-forward Optimum utilization of available space Maximum visibility Maximum accessibility Maximum Flexibility Safety, Security and Satisfaction Advantages of Good Plant Layout Proper and efficient utilization of available floor space Transportation of work from one point to another point without any delay Proper utilization of production capacity. Reduce material handling costs Utilize labor efficiently Reduce accidents Provide for volume and product flexibility Provide ease of supervision and control Provide for employee safety and health Allow easy maintenance of machines and plant. Improve productivity Symptoms of Poor Layout Delays and work stoppage in manufacturing process Slow movement of material through the plant Congestion of materials, components and work in progress Poor utilization of space High material handling and transportation costs Excessive handling by skilled workers Production cycles and delays in delivery Mental or physical strain on operators Difficulties in maintain effective supervision and control Underutilization of machines and workers Lack of flexibility and difficulty in production planning and control Types Of Layout: There are mainly four types of plant layout: (a) Product or line layout (b) Process or functional layout (c) Fixed position or location layout (d) Combined or group layout Product or line layout: In this type of layout the machines and equipments are arranged in one line depending upon the sequence of operations required for the product. It is also called as line layout. The material moves to another machine sequentially without any backtracking or deviation i.e. the output of one machine becomes input of the next machine. It requires a very little material handling. It is used for mass production of standardized products. Advantages of Product layout: Low cost of material handling, due to straight and short route and absence of backtracking Smooth and continuous operations Continuous flow of work Lesser inventory and work in progress Optimum use of floor space Simple and effective inspection of work and simplified production control Lower manufacturing cost per unit Disadvantages of Product layout: Higher initial capital investment in special purpose machine (SPM) High overhead charges Breakdown of one machine will disturb the production process. Lesser flexibility of physical resources. Process layout: In this type of layout the machines of a similar type are arranged together at one place. This type of layout is used for batch production. It is preferred when the product is not standardized and the quantity produced is very small. Advantages of Process layout Lower initial capital investment is required. There is high degree of machine utilization, as a machine is not blocked for a single product The overhead costs are relatively low Breakdown of one machine does not disturb the production process. Supervision can be more effective and specialized. Greater flexibility of resources. Disadvantages of Process layout: Material handling costs are high due to backtracking More skilled labour is required resulting in higher cost. Work in progress inventory is high needing greater storage space More frequent inspection is needed which results in costly supervision Combined layout: A combination of process & product layout is known as combined layout. Manufacturing concerns where several products are produced in repeated numbers with no likelihood of continuous production, combined layout is followed Fixed position or location layout: Fixed position layout involves the movement of manpower and machines to the product which remains stationary. The movement of men and machines is advisable as the cost of moving them would be lesser. This type of layout is preferred where the size of the job is bulky and heavy. Example of such type of layout is locomotives, ships, boilers, generators, wagon building, aircraft manufacturing, etc. Advantages of Fixed position layout: The investment on layout is very small.  The layout is flexible as change in job design and operation sequence can be easily incorporated. Adjustments can be made to meet shortage of materials or absence of workers by changing the sequence of operations. Disadvantages of Fixed position layout: As the production period being very long so the capital investment is very high. Very large space is required for storage of material and equipment near the product. As several operations are often carried out simultaneously so there is possibility of confusion and conflicts among different workgroups.

Critical Summary of the Sunrising by John Donne Essay

The Sun Rising,† by John Donne, is a lyric poem about two lovers. The poem is divided into three stanzas, each ten lines long. The rhyme scheme in each stanza is ABBACDCDEE. This is a dramatic poem where the speaker and his lover are in bed together. The speaker personifies the sun, and is speaking to it throughout the poem. As the sunlight comes through the windows, the speaker tells the sun to leave them alone. He seems to feel that their life together is complete, and that the sun is being a nuisance. He then tells the sun that his lover is worth more than anything the sun can ever find outside their bedroom. The poet addresses the sun as a person and rebukes the sun because it has wakened him and his lover from their sleep. He demands to know why lovers should obey time. He addresses d sun as â€Å"busy old fool†. He calls it unruly bcoz by peeping into d bedroom through windows nd curtains it disturbs d lover. He also shows his dominance over the sun, calling it a ‘saucy pedantic wretch’ and tells the sun to bother other people instead such as late school boys or workers imploring or more time to sleep. He tells the sun to find the royal court people and farmers to let them start their day instead of controlling the lovers, because time does not exist in love and unlike season or climate or sun, love doesn’t change. Hours, days and months are just silly, useless measures. In dis section of d poem we come across colloquial expression like â€Å"busy old fool† nd â€Å"saucy pedantic wretch† such terms of contempt fitfully set d tone of d poem whic h is one of annoyance. The poet challenges the sun about its strength, that the sun isn’t is high and mighty. because he can make it disappear by winking, except he doesn’t wish to â€Å"lose her sight so long† He teases the sun that his lover’s eyes are so beautiful and bright that it can blind the sun. He tells he sun to go to far away countries like India or stay because the entire world is with him in the bed. The sun can also find kings but he and his lover are so superior that even the kings will say the most important people are in his room, ‘all here in one bed lay’. The poet claims that his lover is ‘all states’ and in fact the whole world itself and he is the ‘prince’ that rules it, nothing else exists other than them. They are the celebrity, and even other princes want to mimic them. He declares that honour and science are nothing compared to their love and that the sun is only â€Å"half as happy as we.† He says the sun is old and so it should rest because its duty is to warm the world and since they are the world, the sun has completed its duty. Then, the poet cleverly turns the sun’s refusal to leave into a show of its generosity and by shining at them, it has centered itself upon the room of his love and so they are the sun, the center of the universe. The last part of d poem reveals d poets wit, his mastery over d use of apt imagery nd conceits. At d begning of d poem d poet asked the sun to go away from dere . now he invites the sun to go round their bed nd shine on dem

KOA Team

The team  KOA works with the motive of solving customer needs with innovative use of technology. Innovation is done by the taking the feedbacks of the existing technologies and comparing with the most dynamic products present in the market. It is expected from us to launch new products and learn from customer interactions to make them better. The team works on the flaws by brining in different perspectives to find new solutions to problems. Continuous commerce innovation grounds are laid down at the speed of business. The present website of dell is found to have some flaws for which we are working on making Dell.com more responsive. MOTIVATIONAs we build our Future State Commerce Platform, we believe our success is to build an open, extensible and participative platform that can be extended to meet the diverse needs of customers and our business in a self-service fashion. Research of the industry and defining what a modern Developer Experience Consist of and work dynamics are taken in consideration. Building a strategy that can outline how Dell Digital and IT can build this great Developer Experience. Delivering a prototype that showcases with documentation and code examples what each use case at the end of the project. Embracing the Pivotal Labs development model for continuous improvement and delivery. Empowering all organizations to leverage the platform to create their own services, apps, and experiences.ABOUT PROJECT KOA(A) PIVOTAL PRACTICESCloud Foundry  is an  open source, multi cloud application  platform as a service  (PaaS) governed by the Cloud Foundry Foundation. The software was originally developed by  VMware  and then transferred to  Pivotal Software, a joint venture by  EMC,  VMware  and  General Electric.   the creation of the Cloud Foundry Foundation, the Cloud Foundry software (source code and all associated trademarks) was transferred to be held by the open source software foundation. It is primarily written in  Ruby,  Go  and  Java. Cloud Foundry is promoted for  continuous delivery  as it supports the full application development lifecycle, from initial development through all testing stages to deployment. Cloud Foundry's container-based architecture runs apps in any programming language over a variety of cloud service providers. This multi-cloud environment allows developers to leverage the cloud platform that suits specific app workloads and move those workloads as necessary within minutes with no changes to the app. Users have access to one or more  spaces, which typically correspond to a lifecycle stage. For example, an application ready for QA testing might be  pushed  (deployed) to its project's QA space. Different users can be restricted to different spaces with different access permissions in each. When an application is deployed to Cloud Foundry, an image is created for it and stored internally. The image is then deployed to a  Warden  container to run in. For multiple instances, multiple images are started on multiple containers. This is where  BOSH  comes in – Cloud Foundry's internal Controller uses BOSH to get the underlying infrastructure to spin up virtual machines to run the Warden containers on. When an application is deleted, all of its containers are destroyed and their resources are freed for other applications to use. If the application instance crashes, its container is killed and a new Warden container is started automatically. A container only ever runs one application ensuring isolation, security and resilience.A load-balancing router sits at the front of Cloud Foundry to route incoming requests to the correct application – essentially to one of the containers where the application is running.PAIR PROGRAMMINGWe pair our product managers, designers and engineers with counterparts from your team to work side by side, in the same office, 40 hours a week. The deliberate practice of staffing every workstation with two software engineers focused on writing software together. Similar to rally racing, the driver and navigator have the same goal – write high-quality and maintainable code that works. The driver and navigator can often switch roles throughout a programming session (unlike in rally racing). Driver: In addition to what the Navigator does – Actively typing at the keyboard, can yield to navigator   Navigator: Error checking, looking up APIs, thinking about ways to better structure the code, can jump in and drive It is seen that there are lot of benefits in pairing. The team which working through this practice gets boosting efficiency through collaboration during working. Knowledge can be shared dynamically during works hours, thus making the team more enthusiastic and skill can be transferred simultaneously rather than wasting time in learning the same. It not only enhance our skills but also prevents knowledge silo.There is even cent percent transparency in work.KOA PLATFORM TENETSGlobal: Provide global services that can be configured for regional needs. Customer experience is consistent regardless of location.Modern: Design extensible, scalable, loosely coupled systems and favor open versus closed systems to power experiences from mobile, to desktop, to voice and beyond.Agile: Operate in an ever changing world and to make rapid progress. Empower small balanced teams to operate independently and adapt quickly.Balanced: Technology serves the business and we balance speed of business value delivery with long term technology purity.Transparent: Inspire trust by providing open access to information and services. Progress will be measured by demonstration of capabilities.Pragmatic: When choosing between out of the box and custom solutions, opt for the solution that provides the most flexibility, at the lowest long-term cost. Use Dell technology when possible.Personalized: Start with our internal and external customers and work back to anticipate needs in real time based on data insights. Our systems understand individual customers to present relevant experiences.COMMERCE TRANSFORMATION AND CUSTOMER BENEFITSECommerce isn't new anymore, and as its novelty fades we're seeing businesses looking to hone their digital strategies to perfection. It is found that customer satisfaction is almost always the main goal, and as a result , that is what's driving most business strategies. This, in turn, is pushing organizations to adopt additional changes and bring in transformation in e-commerce. Some of the new innovation which are going to be implemented in the project is listed below.DELIVERABLESThe product should seamlessly interact with Dell Technologies entire Product Offering so that we can achieve our desired outcome across our entire experience.CONCLUSIONBecome familiar with the most modern technologies used to build great developer communitiesUnderstand the importance of using modern tools to increase velocity of ITOutside in view of Developer ExperiencesInternal interviews and research across Developers and functionsDefinition of Developer Experiences by employee personas (Software Developers, Content Ops, UX Design, Analytics, Business)Deliver 2 to 3 Demos that can be immediately actioned by Dell.

Effects of Globalisation on Economic Growth Essay

Discuss the effects of globalisation on economic growth and the quality of life in the Chinese economy. Globalisation is the progression towards a growing assimilation between different countries in order to gain a single world market. It strongly encourages overseas trade, the removal or the reduction of trade barriers to increase economic growth and development. Globalisation ultimately presents to everyone a world which is increasingly liberalized and market-orientated. Associated with globalisation there is increased and intensified competition and greater interdependence among countries. In numerous ways China has taken this opportunity and used it to its full advantage which has enhanced economic growth and significantly improved the quality of life. China’s influence in the world economy was minimal until the late 1980’s but we are now seeing China being one of the most independent countries and leading the manufacturing producing market. China started with a fragile economy with minimal infrastructure from frequent revolutions and invasions in 1949. In the early 1980’s, China’s economy was still extremely weak as a result of its inward looking government system of a socialist planned economy under the Mao government. This resulted in living standards below world averages and economic growth at nearly zero. China has risen from the edge of economic obscurity to lead the world in terms of economic growth, and this is done is just over a quarter of a decade. The People’s Republic of China has transformed from a planned economy into a socialist market economy and is now the world’s second largest economy to the USA being number one, by nominal GDP at $7.3 trillion and by purchasing power parity (PPP). â€Å"Pay attention to what’s going on in China. â€Å" – Jeff Mbanga – The Observer. China is the world’s most rapidly growing economy with their growth rates averaging 10% in the past 30 years. In the past decades there has been a significant increase in international trading and investments flows due to globalisation. This has led to high levels of economic growth. It was unusual in the 2007-08 Global Financial crisis how an industry was maintaining an average economic growth rate of 8.5% per year. In addition to  this China’s trade with other nations has expanded 16 times more. This is occurring due to their extremely low prices which are highly competitive and pleasing to the developed western world. Although with the recent European Sovereign debt crisis â€Å"Growth in China has slowed, but to a rate that remains the envy of the world, while Chinese industry continues its march onto the world stage.†- Time magazine. China’s financial system which is often regulated has promptly expanded due to monetary policy becoming increasingly fundamental to its complete economic policy as a result of globalisation. The outcome of this has resulted in banks distributing an increase in finance to its enterprises for investment, deposits for liquidity and also loaning money to the government which maybe then reallocated in providing infrastructure. The most significant result of globalisation has been the development of China’s import sector and has allowed the nation to become the second largest exporting economy in the world. The large export sector of extremely low cost goods and services has manipulated the trade currents of the world. Through China’s growth it has developed a stable-body of trading partnerships with raw material producers. An example of this is with Australia where 40% value of all products exported is worth around $40 billion. China is buying these raw materials to accommodate its largely growing urban-mega-cities and industries to produce new goods and create more low-cost goods and a more intensifying complex form of trade. Through constant trading globally, this has increased the aggregate demand. As of 2011 foreign direct investment (FDI) has exceeded from $US.100 billion in 2010 to $US.116.10 billion. This has occurred through the private and public growth in mining, construction trade and finance. This globalisation impact has also seen a shift in the population from rural areas to urbanised cities. This has led to a decrease in agricultural produce and an astonishing increase in industrial goods and services and alleviated a substantial amount of China’s absolute poverty. The Chinese government has embraced a series of strategic policies to address the challenge of economic globalization. These strategies started in 1978 after Chairman Mao’s self-sufficient economy plan. China began employing several reform strategies to enhance growth. This included stimulating the agricultural sector to allow them to sell a percentage on the free trade market yet hold a competitive position. In addition to this  citizens were given money incentives and tax breaks in order to start new businesses and allocated regions were created to encourage high levels of investment, increase exports and increase technology levels. Other reform strategies included Deng Xiaoping’s the rearrangement of the economic structure by increasing the development of the high technology sector and moving away from the agricultural sector; transformation of the pattern of economic growth by increasing power in IT education and sustainable development as well as additional progress of the outward-oriented economy by implementing â€Å"come in† and â€Å"go out† strategies. This is where the government encourages its enterprises to invest overseas. This has been demonstrated in Australia where Chinese investors have bought farming land and are now operating that land and are taking that product back to China. Also, the government consolidated reform in State Owned enterprises ( SOEs) and government administration with a view to establish a governing mechanism in compliance with international rules and practices. These policies noticeably ease China’s integration into the global economy and have proven effective as of 2010 where almost 50% of the total population was urbanised. It took only 22 years to increase from 17.9% to 39.1%; this was the same increase which took Britain 120 years. Similar to the â€Å"come in, go out† strategy. Chinas government has applied the promotion of overseas direct investment (ODI) allowing them to invest in the large pool of foreign currency. This strategy is fulfilling their economic growth mentality and development strategies. It was 2000 when China forwarded the ‘Go Global’ strategy which encouraged firms to invest overseas. Its objective is to utilise foreign exchange reserves to purchase or buy shares in foreign firms that seem profitable. Rather than building the foundations of investment in domestic firms, China has wanted to promote the development of internationally recognized brands such a Lenovo Group Limited which has its operational headquarters in Morrisville, North Carolina, USA and its registered office in Hong Kong. These reform strategies saw an upturn in economic growth rates to 9.8% annual average over the following years with this growth almost doubled from the pre-reform 5.3% shown in Figure 1. This created an influx of employment and income thus increasing the overall living standards of the economy. Foreign Direct Investment utilisation (come in and go out strategy) saw an increase of $2 billion to $92 Billion from  1985-2008 shown in figure 2. By utilising the globalisation transformation it allowed China to become exposed to global markets and increase trade and the profits made from globalisation. Figure 1. Economic development recognises both a quantitative growth measurement and important qualitative measures. A developing country is a nation with a low living standard, undeveloped industrial base and low Human Development Index. For a country to be classified as developed they have to fill a certain criteria. This includes a number of areas such as the GDP per capita, Safe water, Malnutrition, the number of poverty related deaths (malaria), Infant mortality and life expectancy. The Chinese government has grown concerns in these specific areas. In China the Human Development Index (HDI) has risen from 0.404 in 1980 to 0.682 in 2011. They are ranked 101st out of 187 countries with comparable data. The HDI has been on a steady increase since then, in 1990; 0.490 and 2000; 0.588. This shows that their overall standards of living have improved; other statistics show that their life expectancy: 73.5 years and at 0.843 out of 1; Education is at 0.623 with a compulsory 7.5 years of schooling whilst Australia is 0.981 with 12 years of schooling. This is due to policies similar to the reform of the health care system in 2005 where only 20% of the health care services would be in rural areas. This has seen China invest US $2.4 billion to rebuild rural medical centres composing of village clinics and hospitals. With relations to educational spending China has increased its spending by 20% in consecutive years since 1999 and now exceeds $100 billion. The reason China is outlaying an excessive amount of money it will build a more stable and productive population by producing skilled workers. This investment has seen a relief of absolute poverty declining 25% in rural areas. Shown in figure 3, the GDP per capita has increased drastically in 18 years which has allowed the standard of living to increase. China is still a developing country. Its service sector is relatively small and weak in comparison to its other sectors in the country and its counterparts in other countries. In addition to this in 2006 the eastern region covering 10% of  the land accounted for 55.7% of China’s GDP. Due to this uneven distribution of income this will decrease standards of living in other areas and major class seperation. â€Å"China has long been criticised for its incredibly uneven distribution of wealth.† Figure 4 highlights the success of the stimulating strategies as leading economies such as Germany and the US both experienced negative growth over the course of the Global financial crisis. The major cause for this is due to the Chinese government artifically stabilising the exchange rate to constantly produce cheap products. It was at this time that these cheap products continued to be sold to larger countries to fulfill their aggregate demand and thus China continued developing.Though with the US and Europe are in a substantial amount of debt, this has slowed the production with the Chinese production. It is said, if â€Å"China is to sneeze the whole world will catch a cold† Figure 3↑ Figure 4↓ With the extensive economic growth and the development the environment has been completely neglected as China concerntrates on its escalation in the economic world. Economic development officials often overlook envoronmental pollution, worker’s health and safety and simple public health in priority to enhance the living conditions of those in the area. The impact which china has had on its environment is illustrated through the excessive quantity of air pollution with 1% of the 500million; and growing, people who inhabit the cities. Although the breathing air is deemed safe by the European Union (EU), 1/3 of children are suffering from elevated blood levels as a result of the air quality. (Refer to picture 1.)Picture 1shows smog which is serious harm to health. It is a combination between smoke and fog and can inflame breathing passages, decrease the lung’s working capabilities, cause shortness of breth and pains whilst breathing. Regardless of these statistics China has spent $34.6 billion on clean energy and are now the leading investor of renewable technology. China is also the number one producer of carbon dioxide emitter and with conjunction to inda being the 3rd largest they account for 30% of the world’s emmisions. In conclusion globalisation is based upon nations becoming more integrated and reducing the trade barriers between nations. Although by increasing trade  this makes some countries dependent upon imports to create revenue by consumer consumption rather than utilising their comparative advantage. While by being so interdependent upon each other this will allow economic changes to ripple through and impact on other countries. Globalisation has obviously encouraged the majority of China’s accomplishments in assimilating into the global economy. The policies implemented have flowed through the economy and is showing signs of economic growth and quality of life in a number of areas. These policies will continue to promote economic growth not only for the temporary fixations but will be drawn-out for years to come. Through constructive motivation China is now moving towards clean energy usage, environmental sustainability and increasing the health of the nation and will soon be labelled a developed economy. Chinese economy essay Bibliography http://www.chinadaily.com.cn/china/2012-10/29/content_15855250.htm 30/10/12- 12:44, Updated: 2012-10-29 21:18 http://en.wikipedia.org/wiki/Economy_of_the_People’s_Republic_of_China 30/10/12 12:54, last modified on 28 October 2012 at 17:41. http://www.economist.com/blogs/freeexchange/2012/10/rebalancing-china?zid=306&ah=1b164dbd43b0cb27ba0d4c3b12a5e227 7/11/12 – 10:11 am, Oct 20th 2012, 12:11 by S.C. | The Economist http://business.time.com/2012/11/07/can-chinas-new-leader-prevent-an-economic-crisis/ 8/11/12- 1:50 pm, Nov. 07, 2012 – Time Magazine http://www.google.com.au/imgres?um=1&hl=en&sa=N&biw=1366&bih=677&tbm=isch&tbnid=4kyBsA9wIHlN9M:&imgrefurl=http://blendedpurple.blogspot.com/2010/08/consumption-rate-china-gdp-1980.html&docid=PQa1gLnb9LbE6M&imgurl=http://3.bp.blogspot.com/_HfjiE1BoIuI/TFZ6oh4cqtI/AAAAAAAAAb8/cDQsjr3og-U/s1600/A006%252Bcopy.jpg&w=933&h=545&ei=mBmkUPrWFqqgigeq74G4Ag&zoom=1&iact=hc&vpx=381&vpy=159&dur=5207&hovh=171&hovw=294&tx=125&ty=76&sig=108432953463892850089&page=1&tbnh=131&tbnw=248&start=0&ndsp=20&ved=1t:429,r:1,s:0,i:72 9:27am 15/11/12, August 2 2010-NA http://news.xinhuanet.com/english/china/2012-01/18/c_131366513.htm 16/11/12-9:26am, English.news.cn 2012-01-18 10:35:11 http:/ /en.wikipedia.org/wiki/Go_Out_policy 2:07pm 18/11/12 last modified on 13 February 2012 at 22:36. http://en.wikipedia.org/wiki/Lenovo#History